LVDT accessories

eddylab provides various accessory products that are specially adapted to the individual series of LVDT sensors.

Connection cables, extension cables and connectors can be found in the ‘Universal accessories’ category.

Feeler heads

Probes are used with all LVDT sensors with a spring probe mechanism. They have an M2.5 thread with which they are screwed into the push rod of the sensors.They are therefore interchangeable. The different geometries allow measurement in narrow bores, for example, or spread the spring force of the sensor over a larger area. The probe tips are available in different materials.

Gaiter

The bellows protects the sensor mechanism from dust and dirt. It is used in the SM series displacement transducers with a spring-loaded sensor mechanism. In addition to the gaiter, a set also includes all the fastening rings required for secure mounting. These sets can be used to retrofit a sensor without gaiter and as a replacement part for a damaged gaiter.

Mounting accessories

>  For simple, convenient installation of the sensor using a clamping mechanism. Unlike a point-type clamping, for example using a radially mounted grub screw, the circumferential clamping does not damage the sensor housing. The sensor can be easily removed or axially adjusted at any time.
>  Foot clamps allow the sensor to be mounted at 90° to the fixing level.
>  Flange clamps are used to install the sensor parallel to the fixing level.
>  Clamping pieces are available in different versions, adapted to the diameter of the inductive sensors.
>  The available materials qualify the clamps for different operating temperatures